[AT] OT

[Richard Fink Sr]

Gary your 580B must be different than mine. The only way to access that top 
seal [with out removing motor] is take top section of column off. And with 
them pins and bolts having been in near 40 years don,t think that will 
happen. I have consider cutting of throttle and shuttle shifter above top 
section and removing it then motor out top.Weld them back on when done. Now 
i know why Case said 3 to 4 hour job at 95 bucks a hour. But know one from 
case showed up.
R Fink
PA


----- Original Message ----- 
From: <k7jdj at aol.com>
To: <at at lists.antique-tractor.com>
Sent: Friday, September 20, 2013 2:03 PM
Subject: Re: [AT] OT


> Richard,
>
> The seal that was bad was on the top.  I believe we just removed the 
> steering wheel and some other stuff.  I remember that my son helped me as 
> it took another set of hands. Sounds like you are close to success.  I can 
> check with him after work today as his young mind will be better than 
> mine.
>
> Gary
>
>
>
>
>
>
>
> -----Original Message-----
> From: Richard Fink Sr <rfinksr at verizon.net>
> To: Antique tractor email discussion group <at at lists.antique-tractor.com>
> Sent: Fri, Sep 20, 2013 10:19 am
> Subject: Re: [AT] OT
>
>
> Gary i wish you could remember how you got the motor out. I have hood off
> dash out and looks like if i can raise cab end of fuel tank i may get 
> motor
> out that way.
> Thanks
> R Fink
> PA
> ----- Original Message ----- 
> From: <k7jdj at aol.com>
> To: <at at lists.antique-tractor.com>
> Sent: Friday, September 20, 2013 8:09 AM
> Subject: Re: [AT] OT
>
>
>>I put new seals in a 580B steering motor several years ago. I know I 
>>didn't
>>have to remove the fuel tank.  I remember having some help and it was a 
>>bit
>>of a challenge.
>>
>> Gary
>> Renton, WA
>>
>>
>>
>>
>>
>>
>>
>> -----Original Message-----
>> From: Richard Fink Sr <rfinksr at verizon.net>
>> To: Antique tractor email discussion group <at at lists.antique-tractor.com>
>> Sent: Fri, Sep 20, 2013 4:49 am
>> Subject: [AT] OT
>>
>>
>> I know a lot of OT from me. Has any one worked on a Case 580 B steering
>> motor
>> the one in the column. Mine got a leak flex hose to motor. Not impossible
>> to get
>> to but close. It appears that to get it out you need to remove hood-fuel
>> tank-dash not pleasant thought. Real tough for a fellow that has problem
>> standing and walking. ALL thoughts welcome.
>> [Tractor part this is what i move them with]
>> R Fink
>> PA
>> _______________________________________________
>> AT mailing list
>> http://www.antique-tractor.com/mailman/listinfo/at
>>
>>
>> _______________________________________________
>> AT mailing list
>> http://www.antique-tractor.com/mailman/listinfo/at
>
> _______________________________________________
> AT mailing list
> http://www.antique-tractor.com/mailman/listinfo/at
>
>
> _______________________________________________
> AT mailing list
> http://www.antique-tractor.com/mailman/listinfo/at