[AT] Moline Universal Tractor Manual.

Barry & Tanya Stait bst41474 at bigpond.net.au
Tue Mar 19 22:42:04 PDT 2013


Hi Joe. Thank you for looking. My fathers tractor is a Moline Universal D 
model and the carb is round in shape two sections. The bottom section is the 
wick that is keep alight by the magneto. The top section has the float and a 
type of jet. There is only one mixture screw which is on top in the middle 
of the carb.
Barry.
----- Original Message ----- 
From: <joehardy at epix.net>
To: "Antique tractor email discussion group" <at at lists.antique-tractor.com>
Sent: Wednesday, March 20, 2013 12:46 PM
Subject: Re: [AT] Moline Universal Tractor Manual.


> Hi Barry; What model Carb do you have? Following info is for models: 
> TSX633, TSX650; TSX713; TSX714; TSX878. Recommended float setting is 1/4 
> inch when measured from nearest face of float to gasket on carb 
> body.Suggested initial adjustment both low & high speed mixture 
> adjustments needles is 1-3/4 to 2 turns open from closed position. First, 
> readjust high speed mixture needle for ok performance under load and 
> engine is warm. Then readjust low speed mixture needle for slow speed 
> operation. I have an I&T shop service manual for most MM tractors so if 
> your carb is something different, let me know. I'm in process of 
> rebuilding a MM335 for the past year and a half and my wife wants it out 
> behind of our house ASAP. Spring is coming (I hope) in NE Pennsylvania so 
> gotta get it running soon. Joe Hardisky  Ryman Farm Dallas, PA
> ----- Original Message -----
> From: "Barry & Tanya Stait" <bst41474 at bigpond.net.au>
> To: "Antique tractor email discussion group" 
> <at at lists.antique-tractor.com>
> Sent: Tuesday, March 19, 2013 1:55:57 AM
> Subject: [AT] Moline Universal Tractor Manual.
>
> Hi all, just wondering if any would happen to have a copy of a owners 
> manual or a repair manual for a Moline Universal tractor and would be able 
> to copy and email the section on adjusting the carb to me.
> My father has a Moline and I can not get it to idle.
> Thank you. all in advance.
> Barry Stait.
> Barry & Tanya Stait.
> Mudgee. NSW. Aust.
> bst41474 at bigpond.net.au
> _______________________________________________
> AT mailing list
> http://www.antique-tractor.com/mailman/listinfo/at
> _______________________________________________
> AT mailing list
> http://www.antique-tractor.com/mailman/listinfo/at
>
>
> -----
> No virus found in this message.
> Checked by AVG - www.avg.com
> Version: 2013.0.2904 / Virus Database: 2641/6187 - Release Date: 03/18/13
> 




More information about the AT mailing list