[Farmall] Anybody need an International H4?

[Milo]

On 1/26/2013 8:10 AM, jtchall at nc.rr.com wrote:
> Milo, won't work on your 10-20. You should have a Splitdorf 46C, IH E4A or
> an IH F4. I seem to recall seeing a Bosch unit listed in the parts books as
> well, but would really doubt you have one of those. Regardless, they would
> all be base mount magnetos, where the H-4 is a flange mount.
>
> There are lots of things to wear and go wrong on earlier magnetos. One thing
> I always do is to replace the carbon brushes in the cap with new ones and
> clean the buildup off the distributor disc. Also look for damaged wire
> insulation, ran into that a few times. Did you place a keeper over the
> magnet when you pulled it to change the condenser? Let us know what model
> mag you have and maybe we can figure out what is going on.
>
> John Hall
>
>
> -----Original Message-----
> it has a weak spark, even though I replaced the points and condenser.
> I guess I'll have another go at it.
> This is the 10-20 that powers my road grader.
>
Thanks for the reply John. It'll be awhile before I'll have time to get 
back to that restoration.
I'll put this e-mail with my paperwork for the grader.

-- 
Peace
Milo
milosmachineshed.com