[Farmall] drawbar bolts

[Mark Weinheimer]

I use standard 3/4" bolts with washers to attach drawbars and cultivators
to As Cs etc.  It you are fussy , you can grind the bottom of the bolt head
to fit or make tapered washers with a grinder.  But for most applications,
standard bolts with washers work just fine.

On Fri, Apr 12, 2013 at 10:41 PM, E. John Puckett
<ejpuckett at centurytel.net>wrote:

> I don't know about aftermarket, but before you get too excited check
> with a dealer yourself.  also try salvage yards such as
> Jptractorsalvage.com.  They have a site on the internet, but their email
> service is not dependable, so get their number from the website and call
> them.
> On 4/12/2013 9:07 PM, jtchall at nc.rr.com wrote:
> > Anybody know of a aftermarket supplier for the tapered head bolts that
> mount the drawbar/cultivator to the bull gear housing on a Super A-140? Had
> a fellow tell me tonight the dealer was charging $45 each for them.
> > I think I need to order me some hex bar stock and make a batch.
> >
> > John Hall
> > _______________________________________________
> > Farmall mailing list
> > http://www.antique-tractor.com/mailman/listinfo/farmall
> >
> >
> >
>
> _______________________________________________
> Farmall mailing list
> http://www.antique-tractor.com/mailman/listinfo/farmall
>



-- 
Mark Weinheimer
Farm Manager
Regional Food Bank of NENY
965 Albany-Shaker Road
Latham, NY  12110
(518) 339-5726
(518) 786-3691
(518) 786-3004 Fax
www.regionalfoodbank.net
https://www.facebook.com/PatroonLandFarm