[AT] O.T. pipe size

[charlie hill]

I just re-read your message.  Since you only need a relatively short piece 
find a machine shop and see if the have it in 2" structural tubing.
Or if there is a company around your area that does industrial pipe work or 
puts in fire sprinkler systems ask them, they may have a short piece of pipe 
laying around.  I don't have the access to this kind of stuff I used to or 
I'd see if I could get a piece and send it to you.

Charlie

-----Original Message----- 
From: Don Bowen
Sent: Friday, July 20, 2012 5:31 PM
To: Antique tractor email discussion group
Subject: [AT] O.T. pipe size

I need a section of pipe or tubing with an O.D. not greater than 2" with
an I.D. a little greater than 1 5/8".  This is for an Amateur Radio
tower.  The tubing between the antenna and rotator is 1 5/8". The peak
of the tower has a ring with a 2" I.D. and another about 2' down from
the peak.   A short piece of the unknown sized pipe/tubing will be
mounted between the rings and extending a little above the peak.  A
thrust bearing will be mounted at the top with the 1 5/8 passing through
and held by the bearing.

-- 
Don Bowen           KI6DIU
http://www.braingarage.com/Dons/Travels/journal/Journal.html

_______________________________________________
AT mailing list
http://www.antique-tractor.com/mailman/listinfo/at