[AT] Belts?

[Larry Goss]

That's a BIG if, Jim.  I picked up a 6-inch by 20 foot solid leather belt at the Arden show last year, and put more money into leather conditioner before I could even unroll it than what I spent for the belt.  BUT, that worked.  The belt is now pliable enough to actually be used.  I don't really have a use for it, so if anyone is interested in it -- let me know.

Larry


----- Original Message -----
From: "Jim & Lyn Evans" <jevans at evanstoys.com>
To: at at lists.antique-tractor.com
Sent: Sunday, July 1, 2012 5:50:32 PM
Subject: Re: [AT] Belts?

This isn't a threshing machine or sawmill drive belt.   I have run 
crossed belt with laces for many, many hours, with a 10-15 HP load. That 
is far more power than you need to start a tractor.    Rubber baler 
belts will work fine, but it will still be cheaper to find an old belt 
at a swap meet or auction.  Perfect, long endless belts go for big 
bucks, but you can usually find a less than perfect 6 or 7" belt for 
under $50.   As long as it doesn't rot away, it will still last longer 
than any of our lifetimes being used to jump start tractors or maybe 
running a buzz saw.

On 7/1/2012 1:19 PM, Ralph Goff wrote:
> On 7/1/2012 10:51 AM, charlie hill wrote:
>> Dean they have it in Rolls so with the help of some lacing it can be made to
>> any length.  The roll I saw in the store was probably 50' of so.  They sell
>> it by the foot.  it's 2 ply nylon.  Comes in 6, 7 and 10 inch.  Like you,
>> I'm not sure how much load it would stand or for how long.
>>
>> Charlie
> The steel lacing would be a problem running a crossed belt as it would
> eventually tear itself up . Have to be an endless belt . Best place I
> have found it is at farm auction sales where they are selling an old
> grain chopper, often including the belt . Some of the choppers were not
> easy to install or remove the belt so it was left on permanently. I
> acquired a Cockshutt chopper with the belt still on the pulley. The one
> I use on my hammer mill, my Dad bought with an IH chopper at a farm
> auction years ago. Not too expensive but it was a few years ago. Plus
> not that many old grain choppers left out there maybe by now.
>
> Ralph in Sask.
> _______________________________________________
> AT mailing list
> http://www.antique-tractor.com/mailman/listinfo/at
>


_______________________________________________
AT mailing list
http://www.antique-tractor.com/mailman/listinfo/at