[Farmall] Need Expert Opinion

[Charlie V]

Carl,

No, it is a 12V coil.  The later tractors (340-560, etc)  had a 12V
system.  Like some cars of that era they started on 12v and ran
through a resistor to protect the points when running.  This coil did
away with the resistor.  If you are planning to put your H back to
total 6V operation, none of this will be pertinent to your situation
and you will want a 6V coil with no resistor at all in the system.  If
you plan to keep a 12V battery and charging system, then you can use
the coil I mentioned without a resistor.  I guess I need to re-read
your original post again to learn your intent.  My post focused only
on the " works without resistor" 12V coil.  Hope I did not add
confusion.

Charlie V.



On Thu, Oct 27, 2011 at 8:32 AM,  <szabelsk at gdls.com> wrote:
> Thanks Charlie.
>
> That was a 6V coil right?
>
> Carl Szabelski
> x5947
>
>
> This is an e-mail from General Dyn-a etc. mics Land Systems. It is for the intended recipient only and may contain confidential and privileged information.  No one else may read, print, store, copy, forward or act in reliance on it or its attachments.  If you are not the intended recipient, please return this message to the sender and delete the message and any attachments from your computer. Your cooperation is appreciated.
>
> _______________________________________________
> Farmall mailing list
> http://www.antique-tractor.com/mailman/listinfo/farmall
>