[AT] Brush hog question

David Bruce davidbruce at yadtel.net
Tue Nov 15 13:22:14 PST 2011


My Sitrex 3pt grooming mower uses the same type top link mount.  A few 
inches of play so the mower follows the ground for the most part but at 
the end of that travel a solid link which stops and further travel.  In 
my case works very well.

David
NW NC

On 11/15/2011 3:47 PM, charlie hill wrote:
> Chuck,  if you ever look at a Woods brand brush hog (and some other brands
> too) there is some sort of linkage in the part of the frame that attaches to
> the 3rd link of the 3pt to allow the cutter frame to pivot a few inches on
> the lower 3pt pins but will not allow it to flip over on the operator.   I
> understand why folks use a chain for a 3rd link but in my opinion it is
> dangerous.
>
> Charlie Hill



More information about the AT mailing list