[Farmall] Seat Spring for Farmall H

[Barney Van De Weert]

 Barney Van De Weert 




________________________________
From: Jim Becker <jim.becker at verizon.net>
To: Farmall/IHC mailing list <farmall at lists.antique-tractor.com>
Sent: Sun, July 31, 2011 12:07:59 PM
Subject: Re: [Farmall] Seat Spring for Farmall H

I'm not sure you found the right marks.  I remember the marks as notches at 
the big end, not punch marks on the small end.  The Farmall H online catalog 
only lists the older style seat.  I can't find a Super H catalog online. 
The Super M catalog lists 3 springs with 3, 4 or 5 notches, for light, 
medium and heavy operators, with listings like this:
SPRING, conical (4 identifying notches) (For medium weight operators)
I wouldn't be surprised if the currently available replacements don't have 
any marks.

My Dad's fix for light operators was to run a chain from the middle of the 
spring down to the drawbar, pulling the seat down to a reasonable position 
for the light weight.
Jim Becker

-----Original Message----- 
From: Ed and Mary Gilliland
Sent: Saturday, July 30, 2011 11:27 AM
To: Farmall/IHC mailing list
Subject: Re: [Farmall] Seat Spring for Farmall H

Barney,

I examined my spring, looking for punch marks like you suggested, and found
2 near the small end of the spring.  So, I am thinking that I may also have
the middle spring.  We could trade, but I am not sure it would do any good
for either one of us.  Thanks for responding anyway.

Ed Gilliland

----- Original Message ----- 
From: "Barney Van De Weert" <bbvande at yahoo.com>
To: "Farmall/IHC mailing list" <farmall at lists.antique-tractor.com>
Sent: Friday, July 29, 2011 3:14 PM
Subject: Re: [Farmall] Seat Spring for Farmall H


I have one that is the latest and kind of in the middle, I'd love to have
the
stiff one and would be willing to trade. From what I have been told there is
a
marking system they used. There should be some punch marks on the coils
somewhere. One is soft, 2 is med and 3 is HD. I weigh about 280 and would
like a
stiff one.
Barney Van De Weert




________________________________
From: Ed and Mary Gilliland <egilliland at sbcglobal.net>
To: Farmall/IHC mailing list <farmall at lists.antique-tractor.com>
Sent: Fri, July 29, 2011 2:09:05 PM
Subject: [Farmall] Seat Spring for Farmall H

I have a 1950 Farmall H, and the seat spring that I have is very stiff,
which
produces a stiffer ride and allows me to sit up high in the seat. I only
weigh
150 lbs. This is the standard tapered coil spring, and shock absorber for
that
year. It measures about 8 " at the top, and 2" at the bottom.


I could live with the spring that I have, but I am going to let my 9 year
old
grandson learn to drive the tractor soon, and it would be helpful for him to
sit
a little lower in the seat. I believe that IH made these springs in 3
different
compression strengths, depending upon the weight of the operator, and I
think
that I have the stiffest one. Any ideas as to where is the best source to
start
looking for a new, lighter weight seat spring? Thanks.

Ed Gilliland
egilliland at sbcglobal.net
_______________________________________________
Farmall mailing list
http://www.antique-tractor.com/mailman/listinfo/farmall
_______________________________________________
Farmall mailing list
http://www.antique-tractor.com/mailman/listinfo/farmall

_______________________________________________
Farmall mailing list
http://www.antique-tractor.com/mailman/listinfo/farmall 

_______________________________________________
Farmall mailing list
http://www.antique-tractor.com/mailman/listinfo/farmall