[Farmall] "H" oil filter questions - photos below

[Robert L. Holtzer]

Yes, to both points.   Like my 41 and 42 Ford cars!

Bob Holtzer

At 08:17 PM 3/8/2010, you wrote:
>Bob,
>
>You bring up an interesting point.  By "partial flow", do you mean that, in
>this tractor, not all of the oil that leaves the pump passes through the
>filter?  If that's the case, I suppose that sooner or later, over a period
>of time, all the oil passes through the filter, correct?
>
>On Mon, Mar 8, 2010 at 4:57 PM, Robert L. Holtzer 
><rholtzer at earthlink.net>wrote:
>
> > Clean the groove until you have metal contact.  Old gaskets tend to
> > bake in place.  The gasket does stand on edge and will be retained in
> > the groove once the groove is clean.  These filters are for partial
> > flow and don't need the high pressure seal we are used to these days.
> >
> > Bob Holtzer
> >
> >
>_______________________________________________
>Farmall mailing list
>http://www.antique-tractor.com/mailman/listinfo/farmall