[Farmall] Farmall H Carburator Adjustment

[Kathy Frick]

     John I  am anovice to I had the same problem when i put the carb on my 
H  the problem was that the shaft fromcarb to govner was not in the slot but 
under it hope this helps not sure if explaining this right



----- Original Message ----- 
From: <stubb02 at aol.com>
To: <farmall at lists.antique-tractor.com>
Sent: Thursday, July 08, 2010 10:20 AM
Subject: [Farmall] Farmall H Carburator Adjustment


>
> Greetings,
>
> My Farmall H will start but only runs at a high RPM.  I recently took the 
> lower part of the carb off and thoroughly cleaned the internals and bothl 
> adjustment screws.  I am not sure what the two adjustment screws do nor am 
> I sure if the high rpm problem is with the carb of the governor.  Actually 
> there are three adjustments on the carb.  One of them is in line with the 
> governor.  As you can see, I am a novice.  Any suggestions would be 
> appreciated.
>
> John
>
>
>
> _______________________________________________
> Farmall mailing list
> http://www.antique-tractor.com/mailman/listinfo/farmall


--------------------------------------------------------------------------------



No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 8.5.439 / Virus Database: 271.1.1/2987 - Release Date: 07/07/10 
06:36:00