[AT] Stuck clutch JD 60

[Mike Sloane]

Use of pressure from above is fine, assuming that the piston isn't 
already at the bottom of its stroke. I think I would check that first 
(using a thin rod stuck in the spark plug hole) before going to a lot of 
trouble.

Mike

On 7/7/2010 1:04 PM, charlie hill wrote:
> Oil would be better anyway because if you used grease it would need to be
> cleaned out of the head and upper cylinder.   An oil transfer pump of some
> sort or an old furnace pump might even work better.  As long as the pressure
> didn't exceed normal cylinder pressure it shouldn't hurt anything.   For
> that matter you could fill the cyl. with oil and put air pressure on top of
> it as long as the air input port was above the top of the cylinder.
>
> Charlie
>