[AT] Stuck clutch JD 60

[Dean VP]

Joe,

Yes, you can get to everything related to the clutch through the pulley. One of the JD Two Cylinder
advantages over other tractors of the era. You can download a JD 60 Parts catalog FREE of charge
from the JD Parts web site:

https://jdparts.deere.com/servlet/com.deere.u90.jdparts.view.publicservlets.HomeUnsigned

Right under "Start Searching Here" click on: "John Deere Parts Catalog"

On the new page enter "60" in the model box and click find.


This will bring up all JD products that have a "60" model #.  The 5th on the list you will find the
"244 - Model 60 Tractor". Click on this and it will immediately begin to start downloading the PDF
for the 60 Parts Catalog. It may take quite a while since it is a big file depending on the speed of
your internet connection. After it is fully downloaded, save it on your hard drive. If you like hard
copies you can print out the whole catalog or just print out the pages you need. 

There are several other manuals for the JD 60. One a service manual which I would strong suggest.
Don't buy your manuals at JD, they are overpriced. Go to www.deerelydeparted.com. There manuals are
better quality and sometimes half the price of JD's and have exactly the same information.

Dean VP
Snohomish, WA 98290

Confidence is the feeling you have before you completely understand the situation!
 At the moment
-----Original Message-----
From: at-bounces at lists.antique-tractor.com [mailto:at-bounces at lists.antique-tractor.com] On Behalf
Of jahaze at aol.com
Sent: Tuesday, July 06, 2010 3:33 AM
To: at at lists.antique-tractor.com
Subject: Re: [AT] Stuck clutch JD 60

Dean, when you push the clutch lever forward nothing happens, it will 
move just a  little, but not enough to do anything.  Can I get to the 
clutch pack through the belt pulley? Manual has  been ordered.

Enjoy, Joe


-----Original Message-----
From: deanvp at att.net
To: 'Antique tractor email discussion group' 
<at at lists.antique-tractor.com>
Sent: Mon, Jul 5, 2010 10:55 pm
Subject: Re: [AT] Stuck clutch JD 60



Joe,

Do you have a 60O Parts catalog?  What happens when you push the clutch 
lever
forward? If you take
the clutch cover off and move the clutch lever forward and backwards do 
the
internals of the clutch
move? You may just have to peel all the layers of the clutch off and 
clean
things up. Probably
rusty.

Dean VP
Snohomish, WA 98290

Confidence is the feeling you have before you completely understand the
situation!

-----Original Message-----
 From: at-bounces at lists.antique-tractor.com 
[mailto:at-bounces at lists.antique-tractor.com]
On Behalf
Of jahaze at aol.com
Sent: Monday, July 05, 2010 7:04 PM
To: at at lists.antique-tractor.com
Subject: [AT] Stuck clutch JD 60

My JD 60 O appears to have the clutch stuck in the disengaged position. 
 Anyone
know a simple trick
to getting it to engage?  I took the clutch fork out and looked inside 
and
everything appears to
look OK.  I didn't want to pry on anything too hard for fear of 
breaking
something.  Any
suggestions?

Enjoy, Joe

_______________________________________________
AT mailing list
http://www.antique-tractor.com/mailman/listinfo/at

_______________________________________________
AT mailing list
http://www.antique-tractor.com/mailman/listinfo/at


_______________________________________________
AT mailing list
http://www.antique-tractor.com/mailman/listinfo/at