[Farmall] Light Switch for a Cub converted to 12v

[DBigdog]

Dale,
    There are several 3 position switches available that will do the job. 
If you find one of the original 3 position switches (6 volt) they will work 
as well.  I would suggest you try T.M. Tractor at www.tmtractor.com for one. 
OEM Tractor parts is another possible source.

----- Original Message ----- 
From: Dale
To: farmall at lists.antique-tractor.com
Sent: Tuesday, April 06, 2010 10:15 PM
Subject: [Farmall] Light Switch for a Cub converted to 12v





I recently had my '55 Cub converted from 6v to 12v, and everything is fine, 
except the lights were not switched to 12v.  I bought two 12v sealed beams 
for the front (not installed yet), but have yet to buy for the rear.  My 
question is, what light switch do I put in?  (the old one was just a toggle 
switch with the toggle broken off - I assume it was NOT an original switch) 
Is there anything else that needs to be done?  As I said, I have been 
running it just fine for a year...just never addressed the light situation. 
Thanks for any help.

Dale Finch
_______________________________________________
Farmall mailing list
http://www.antique-tractor.com/mailman/listinfo/farmall