[AT] Case VAH steering disassembly

[Kent Blomgren]

Frank Vantacich wrote:
> I have a bad bind in the steering on a VAH and have narrowed it down to the "steering spindle arm shaft". I have a service and parts manual but it does not describe how to remove this shaft. I have removed the entire front support casting and have removed the nuts on both ends of the spindle arm shaft. Do I have to remove the upper steering arm first, if so how is this done I can not get a puller around it, then either pound or press the shaft out? Does it come out the top or bottom of the assembly?
>
> Thanks for the help! 
>
>
> Frank V.  rustymetal at sbcglobal.net
> _______________________________________________
> AT mailing list
> http://www.antique-tractor.com/mailman/listinfo/at
>
>   
I have a Case VAH with the same steering problem but haven't addressed 
it yet.  I do have a couple manuals for it and will take a look in them 
today to see if that sheds any light on the subject.  I'll let you know 
if I learn anything positive.
Kent