[AT] 98 Dodge 3500 update

[Doug Tallman]

Steve, if you are talking about the way I typed it, then it is a 
nitpick! When I write by hand, my O and my 0 are hard to distinguish 
from each other. However, the idea of searching it with both characters 
is a good one and one I didn't think about. I don't know what search 
engine you used but Google came up with info more relevant to Kevin's 
problem sooner with the O instead of the 0. Both searches seem to list 
forums with questions on the codes on the first page. I'm sure it was 
just how the original questions were typed. Your supposed to be able to 
type a code into Alldata and it should find it. I tried your suggestion 
and it didn't make a difference. It wouldn't come up with it either way! 
Their search function leaves a lot to be desired in my opinion.  Doug T

Stephen Offiler wrote:
> This might seem like a nitpick, but it's not.  That is P "Zero" 753
> (without spaces) not P "letter O" 753.  I mention this because the
> quality of any Internet searching Kevin or others might try to do will
> be vastly improved if you use the zero.  This is a fact; I just tried
> it.
>
> Steve O.
>
> On Tue, May 26, 2009 at 11:14 AM, Doug Tallman <dtallman at accnorwalk.com> wrote:
>   
>> Kevin, checked the trouble chart for the PO753 today. On a Dodge it is
>> the code for the O/D sol circuit. The circuit is monitored continuously
>> when the key is on and is also used as the test for trans relay
>> function. Clear the code and see if it resets on start up or if you have
>> to put it into neutral to get it to set. Doug T
>>     
>>> -----Original Message-----
>>> From: at-bounces at lists.antique-tractor.com
>>> [mailto:at-bounces at lists.antique-tractor.com] On Behalf Of
>>> oldiron62 at gmail.com
>>> Sent: Saturday, May 23, 2009 1:31 PM
>>> To: Antique tractor email discussion group
>>> Subject: Re: [AT] 98 Dodge 3500
>>>
>>> Ok this is what I find with scan tool, PO 753
>>> Shift solenoid A circuit Electrical .
>>> Autozone (where I borrowed the scanner from) said they could not get
>>> parts
>>> to fix. That it was internal transmission ?
>>> Kevin Mosier
>>>
>>>
>>>
>>>       
>> _______________________________________________
>> AT mailing list
>> http://www.antique-tractor.com/mailman/listinfo/at
>>
>>     
> _______________________________________________
> AT mailing list
> http://www.antique-tractor.com/mailman/listinfo/at
>
>
>