[AT] Sawzall blades

[Easley, Greg]

If the pin is hardened you're going to need to use an abrasive blade.
But if there's room to do it safely, the smoke wrench might be your best
bet.

Greg
http://www.geocities.com/heartland/woods/1416


-----Original Message-----
From: at-bounces at lists.antique-tractor.com
[mailto:at-bounces at lists.antique-tractor.com] On Behalf Of Don Bowen
Sent: Monday, June 15, 2009 4:52 PM
To: 'Antique tractor email discussion group'
Subject: [AT] Sawzall blades

I am looking for recommendations for a good metal cutting blade for a
Sawzall.  When I get back to Missouri in a couple of weeks I have to cut
a
bent pin on a backhoe stabilizer arm.  The cylinder needs to come off
because it has a blown seal and no amount of beating has budged the pin.
The local shop told him to cut the pin using a Sawzall and what he
called a
demolition blade.   He was told it would take three or more blades.  So
what
would be a good blade?

 

Don Bowen  KI6DIU

New ruralize pages, follow the link off http://www.ruralize.com

http://www.braingarage.com/Dons/Travels/journal/Journal.html

 

_______________________________________________
AT mailing list
http://www.antique-tractor.com/mailman/listinfo/at