[AT] D2 Magneto Problems (Now Wires)

Fri Jun 12 07:11:49 PDT 2009

Your right about that-- mags and copper core wires get along fine but, I found out several years ago the ole JD B would not fire on anything else. My Dad had put a new wire on the right cyl and it never would fire on that cyl. Yep had put a car ign wire on it. Wire from another made it run fine. Most parts store   mmmm maybe even John Deere has cable and ends to make up sets. I suggest you get a pleirs made to crimp the ends--mush better/prettier than the ole blue pliers job.

________________________________

From: at-bounces at lists.antique-tractor.com on behalf of Easley, Greg
Sent: Fri 6/12/2009 8:30 AM
To: Antique tractor email discussion group
Subject: Re: [AT] D2 Magneto Problems (Now Wires)

NAPA

-----Original Message-----
From: at-bounces at lists.antique-tractor.com [mailto:at-bounces at lists.antique-tractor.com] On Behalf Of william.neff.powell at comcast.net
Sent: Wednesday, June 10, 2009 11:41 AM
To: Antique tractor email discussion group
Subject: Re: [AT] D2 Magneto Problems (Now Wires)

Hello,

Where can I find a set of spark plug wires with actual wires in the core?

Would like to replace the D2 pony wires but I'm thinking that the new high voltage wire won't be a good replacement?

Regards,

Will Powell

----- Original Message -----
From: "william neff powell" <william.neff.powell at comcast.net>
To: "Antique tractor email discussion group" <at at lists.antique-tractor.com>
Sent: Wednesday, June 3, 2009 11:55:43 AM GMT -05:00 US/Canada Eastern
Subject: D2 Magneto Problems

Hello,

My father has a Caterpillar D2 5U with a very weak spark on the pony motor.

Does anyone know where he can find a rebuilt magneto or the parts needed to rebuild his present magneto?

Thanks,

Will Powell

Pennsylvania
_______________________________________________
AT mailing list
http://www.antique-tractor.com/mailman/listinfo/at

_______________________________________________
AT mailing list
http://www.antique-tractor.com/mailman/listinfo/at