[Farmall] Oil for Cub Engine

[E. John Puckett]

That price varies a lot by area.  Where i live in rural Mo.  it will 
cost about $650.  That is assuming you take the engine to the machine 
shop and pick it up there.

Robert Schleyer wrote:
> In PA to have a total rebuild it cost approx. $1500.00. That's new
> everything (pistons, valves, etc.) You will end up with a brand new engine
> that will run for many years if  you take care of it (change the oil, etc.)
> I totally tore down my 1950 Cub and put new rings and bearings in it. While
> I hade it torn down, I used kerosene and cleaned all the oil ports and the
> inside of the block to get rid of years of sludge.  Now it does not burn
> oil, has excellent oil pressure and runs real strong. While I had it apart I
> put a new clutch, pressure plate and throw out bearing in it also. The total
> cost was around $550.00
> Bob 
>   

-- 
John *.?-!.* cub owner

E. John Puckett
10142 Mahagony Rd.
Potosi, Mo. 63664
573-438-2799
cell 573-210-0061