[Ford-ferguson] mail

[David Hoelzeman]

> I have wired the 'simple' wiring on my TO30 as you described.
> A #10 wire from alternator single post---->>>>> to battery side 
> of sol(starter switch) on top of bell housing.

Is this the same post to which the battery cable attaches?  If so, it 
seems like the ammeter is out of the charging circuit and won't show 
charge or discharge.  The current from the alternator to the battery has 
to pass through the ammeter for it to register.  The wire from the 
alternator should go to the ammeter and the other post of the ammeter 
should go to the same post on the starter switch with the battery cable. 
    Found the following wiring diagram:

http://www.fergusonenthusiasts.com/restoration%20helps/wiring/TO%2030%2012V.pdf

The wire from the 'B' terminal on the regulator would be the wire from 
your alternator.

David
'51 TO-20