[Farmall] Farmall not starting---still!

[dan-0001 at comcast.net]

Check the Ground very carefully. My H was having it's issues and nothing seem to help until I cleaned and reinstalled the battery to ground connection. 



Regards Danny 




From: ebony51 at frontiernet.net <ebony51 at frontiernet.net> 
Subject: [Farmall] Farmall not starting---still! 
To: "Farmall/IHC mailing list" <farmall at lists.antique-tractor.com> 
Date: Sunday, August 2, 2009, 9:43 PM 



Well, I am still not  the Farmall A started.  No spark to points.  I put on new points and new condenser.  Set ththe points at .20 and cleaned them.   Had the coil checked.  Put in new distributor gear (old one had a chip in it so the rotor had quite a bit play in it).   Put a new magneto cap on it (it is converted from magneto to 12 volts and the magneto is being used as a distributor.  Put a new wire from the end of the condenser to the base of the points (that is a pain) thinking that it might have a short in it.  

Finally quite tonight at 9:30.  Any suggetions. 

I have been messing with this thing off and an on now for a month. 

Larry H.  









_______________________________________________ 
Farmall mailing list 
http://www.antique-tractor.com/mailman/listinfo/farmall 



       
_______________________________________________ 
Farmall mailing list 
http://www.antique-tractor.com/mailman/listinfo/farmall