[AT] Ford 7600 4WD

[Cecil Bearden]

don't k now have not uncovered the serial number.  It is going to get a 
bath first thing...

Cecil in OKla

charlie hill wrote:
> Good luck with it.  What year is it?
> 
> Charlie
> ----- Original Message ----- 
> From: "Cecil Bearden" <crbearden at copper.net>
> To: "Antique tractor email discussion group" <at at lists.antique-tractor.com>
> Sent: Monday, September 15, 2008 8:25 PM
> Subject: Re: [AT] Ford 7600 4WD
> 
> 
>> It is a state Surplus tractor.  It has been worked in sand..  It shows
>> 500 hrs, but I do not remember if the hour meter works.  It appears to
>> have been used rather hard, but It runs and drives so that says a lot. I
>> am going to modify the loader brackets to put a front mounted hyd pump
>> on it.  That will let the hydraulic outlets work on something at the
>> back.  Perhaps a leveling cylinder and hyd top link.  It has a lot of
>> potential if I don't hit one of those big expense items....
>>
>> Cecil in OKla
>>
>> charlie hill wrote:
>>> Hi Cecil,  I can't help you one bit but I would like to know if that is a
>>> typical yard sale where you come from?  If it is I think I need to move!
>>> Around here the only thing you'll find at a yard sale is baby clothes and 
>>> a
>>> worn out blender.   Sounds like a good find.  Good luck getting it 
>>> running
>>> right.
>>>
>>> Charlie
>>> ----- Original Message ----- 
>>> From: "Cecil Bearden" <crbearden at copper.net>
>>> To: "Antique tractor email discussion group" 
>>> <at at lists.antique-tractor.com>
>>> Sent: Saturday, September 13, 2008 10:51 PM
>>> Subject: Re: [AT] Ford 7600 4WD
>>>
>>>
>>>> I went to a sale yesterday and today a Ford 7600 4WD with a Koyker
>>>> loader jumped on my trailer...
>>>>
>>>> As always it needs some First Aid.  I need to know if it is a 7600 or
>>>> 7610 to get a manual for it.  I have not determined what controls the
>>>> front end.  It has a lever at the left side of the transmission under
>>>> the seat that appears to be a hand brake.  It also has a rod that moves
>>>> vertically about the front edge of the seat.  The front end loader is
>>>> connected into the external hydraulics and the loader cylinders will
>>>> have to be repacked.  It has the 11.2 x 24 front wheels.  It should be a
>>>> good loader tractor. I intend to put a front mounted pump on it.   It
>>>> has a turn signal on the dash so I think it was built in England.
>>>>
>>>> Cecil in OKla
>>>> _______________________________________________
>>>> AT mailing list
>>>> http://www.antique-tractor.com/mailman/listinfo/at
>>> _______________________________________________
>>> AT mailing list
>>> http://www.antique-tractor.com/mailman/listinfo/at
>>>
>> _______________________________________________
>> AT mailing list
>> http://www.antique-tractor.com/mailman/listinfo/at 
> 
> _______________________________________________
> AT mailing list
> http://www.antique-tractor.com/mailman/listinfo/at
>