[AT] 930 case hydraulic filter and gaskets

[Ralph Goff]

Your welcome Cecil. Good luck finding the new filter. I think they are still 
easily available here. I have a spare one on hand for my 730 which I suspect 
is the same as for your 930. Its been a while since I changed one of them as 
my 730 sees limited use now.
Hopefully your hyd. pump is  not damaged from unfiltered oil.

Ralph in Sask.

----- Original Message ----- 
From: "Cecil Bearden" <crbearden at copper.net>
To: "Antique tractor email discussion group" <at at lists.antique-tractor.com>
Sent: Tuesday, June 24, 2008 4:54 AM
Subject: Re: [AT] 930 case hydraulic filter and gaskets


> Ralph:
> Thanks, I found the online parts catalog a little later after my post.
> It is the first time I used it.  Now the fun is finding a dealer that
> has the parts.  I may have to make the gaskets.  They are going to be a
> little tricky in a couple of places.  The O ring seals against the
> gasket.  I thought about just a thin film of silicone.  The gasket is
> only about .005 thick...    The resin filter had blown out in the
> middle.  I do not understand what happened entirely, but I just hope
> this is the problem and it will go back to work.   I have 3 tractors
> down, and the house air conditioner is acting up and the company I work
> for part time is wanting me to start a 6 week job....   Never fails.....
>
> Cecil in OKla
> _______________________________________________
> AT mailing list
> http://www.antique-tractor.com/mailman/listinfo/at
>
>
> -- 
> No virus found in this incoming message.
> Checked by AVG.
> Version: 7.5.524 / Virus Database: 270.4.1/1514 - Release Date: 6/23/2008 
> 7:17 AM
>
>