[AT] Wiring tractors

[pga2 at hot1.net]

Try this link.

http://dueyschutter.freeservers.com/photo3.html

These are generic, though Duey says they are for A-C tractors.
There are several to choose from, including mag fired, distributor
ignition and alternator/12V conversions.

Phil


----- Original Message -----
>From    : oldiron62 at gmail.com
Sent    : Tue, 8 Jan 2008 23:49:11 -0600
To      : Antique tractor email discussion group <at at lists.antique-tractor.com>
Subject : [AT] Wiring tractors


Hello,  anyone know what would be wrong with just removing all the old 
wiring from at least 4 IHC tractors and starting fresh ? Like from Batt to 
alt- amp gauge.
Switch to resistor to coil ect.
Like on the 560 there`s so many wires under the dash that I cant even get to 
the switch to replace it without cutting something out of the way. I cant 
figure what all the wires are for, but for what we use tractors for is farm 
work. And the SC - 350U - 560 - M - Cub are all bad wired since we got them. 
And all but the 350 has Delco alternators on them. Does anyone have a simple 
diagram that will work for these ? If so I would appreciate it if you would 
contact me on or offlist at, oldiron62 at gmail.com
The way it is now is a mess that affects the usability. I wish they all had 
magnetos on them in one way. And in another way like the batt ignition also 
for lighting if needed. I thought it a good time to get off the old disc as 
I am pretty sure that Dean V will know if it is JD or not ?
Thanks Yall
The only tractor we have without wiring problems is the 504 and I had to run 
a jumper from batt to resistor the other day after I let it get wet. So its 
another candidate for a simple rewiring job. O ya I forgot the F-20 and F-12 
but they dont need much wiring with the mags and crank starters.

Kevin

_______________________________________________
AT mailing list
http://www.antique-tractor.com/mailman/listinfo/at