[AT] Wiring tractors

[DBigdog]

Try this link:

http://albums.photo.epson.com/j/AlbumIndex?u=4001561&a=30065733&f=0


----- Original Message ----- 
From: oldiron62 at gmail.com
To: Antique tractor email discussion group
Sent: Wednesday, January 09, 2008 12:49 AM
Subject: [AT] Wiring tractors


Hello,  anyone know what would be wrong with just removing all the old
wiring from at least 4 IHC tractors and starting fresh ? Like from Batt to
alt- amp gauge.
Switch to resistor to coil ect.
Like on the 560 there`s so many wires under the dash that I cant even get to
the switch to replace it without cutting something out of the way. I cant
figure what all the wires are for, but for what we use tractors for is farm
work. And the SC - 350U - 560 - M - Cub are all bad wired since we got them.
And all but the 350 has Delco alternators on them. Does anyone have a simple
diagram that will work for these ? If so I would appreciate it if you would
contact me on or offlist at, oldiron62 at gmail.com
The way it is now is a mess that affects the usability. I wish they all had
magnetos on them in one way. And in another way like the batt ignition also
for lighting if needed. I thought it a good time to get off the old disc as
I am pretty sure that Dean V will know if it is JD or not ?
Thanks Yall
The only tractor we have without wiring problems is the 504 and I had to run
a jumper from batt to resistor the other day after I let it get wet. So its
another candidate for a simple rewiring job. O ya I forgot the F-20 and F-12
but they dont need much wiring with the mags and crank starters.

Kevin

_______________________________________________
AT mailing list
http://www.antique-tractor.com/mailman/listinfo/at