[Farmall] ihc parts books online

[Ed Greany]

A = armature and F = Field.

--- On Sat, 12/20/08, John Bailey <jbailey at communicomm.com> wrote:

From: John Bailey <jbailey at communicomm.com>
Subject: Re: [Farmall] ihc parts books online
To: "Farmall/IHC mailing list" <farmall at lists.antique-tractor.com>
Date: Saturday, December 20, 2008, 8:51 AM

The two terminals on my generator are labeled A and F. The voltage regulator 
is a pile of rust.
I supposed when I get a new regulator and have it all wired up "Batt"
and 
"Gen" will be obvious.
Thanks.

John



----- Original Message ----- 
From: "Mike Sloane" <mikesloane at verizon.net>
To: "Farmall/IHC mailing list"
<farmall at lists.antique-tractor.com>
Sent: Saturday, December 20, 2008 10:11 AM
Subject: Re: [Farmall] ihc parts books online


> As "Bigdog" wrote: "Take a short jumper wire and touch it
to the Batt
> terminal and the Gen terminal on the regulator or cutout.  You should
> see a slight arc and when you do, the job is done.  This is done before
> starting the tractor." (and, of course, with the ignition off)
>
> Mike
>
> Jim Becker wrote:
>> That was explained in the first response you got from DBigdog.  I
don't 
>> know
>> how to explain it any simpler.
>>
>> Jim Becker        jim.becker at verizon.net
>>
>> ----- Original Message ----- 
>> From: "John Bailey" <jbailey at communicomm.com>
>> To: "Farmall/IHC mailing list"
<farmall at lists.antique-tractor.com>
>> Sent: Saturday, December 20, 2008 8:44 AM
>> Subject: Re: [Farmall] ihc parts books online
>>
>>
>>> I agree. But what I need to know is how I would go about
polarizing the
>>> generator on my Cub.
>>>
>>> John
>>>
>>>
> _______________________________________________
> Farmall mailing list
> http://www.antique-tractor.com/mailman/listinfo/farmall
> 


_______________________________________________
Farmall mailing list
http://www.antique-tractor.com/mailman/listinfo/farmall