[AT] The "hood" on the W-4

[DBigdog]

Roy,
    Loosen the muffler clamp and remove the muffler.  The mushroom cap on 
top of the air intake pipe is probably stuck a bit but you can take a block 
of wood and tap up on the cap.  It will pop off.

----- Original Message ----- 
From: Roy Morgan
To: Antique tractor email discussion group
Sent: Friday, December 19, 2008 7:50 PM
Subject: [AT] The "hood" on the W-4


I told you I'm new to tractors:

The oil pressure was low an wavering as I shut of the W-4 the other
day.  I did find where the filler point is after studying the manual
to find the one reference to the thing, dumped in 2-1/2 quarts and all
is well now. Got two new filters and oil at TSC, so I'm prepared to
put new oil into it.

But, in the process of looking for where to put oil in, I discovered
that the top tin on this thing is held down by spring clamps at the
corners, but the air intake and the exhaust pipe keep me from removing
the thing altogether.  Maybe my muffler clamp is lower than it should
or could be, but I can't move the sheet metal up more than an inch.
What's with that?

Roy



Roy Morgan
k1lky at earthlink.net
529 Cobb St.
Groton NY, 13073





_______________________________________________
AT mailing list
http://www.antique-tractor.com/mailman/listinfo/at