[Farmall] Slow Cub Oil Pressure

[szabelsk at gdls.com]

A new oil pan gasket is always best. In a crunch you can reuse the old 
gasket by first wiping it and the mating surface down with a little bit of 
carb cleaner, or something equivalent, and apply a light film of RTV. This 
of course assumes half of the gasket doesn't stick to the pan and the 
other half stick to the block. Using straight RTV will also work, but you 
have to be careful not to squeeze everything out, or leaving to bolts too 
loose and they fall out when you use the tractor. If you can't find a 
gasket locally, go to your local auto parts store and by a sheet of cork 
gasket material, trace the pan on the cork sheet, and cut it out such that 
it is about 3/4 wide.

Carl Szabelski



This is an e-mail from General Dynamics Land Systems. It is for the intended recipient only and may contain confidential and privileged information.  No one else may read, print, store, copy, forward or act in reliance on it or its attachments.  If you are not the intended recipient, please return this message to the sender and delete the message and any attachments from your computer. Your cooperation is appreciated.