[Farmall] H Generator problems

[John & Jan Paur]

  Ron,  Check to be sure that the cover on the switch/ammeter box is 
grounded to the tractor.  Rust and/or paint might be preventing a good 
contact which might prevent the ammeter from registering.   John

  ----- Original Message ----- 
  From: "Ron Bledsoe" <ronbledsoe at wildblue.net>
  To: <farmall at lists.antique-tractor.com>
  Sent: Wednesday, September 05, 2007 12:04 PM
  Subject: [Farmall] H Generator problems


  >I have an H with magneto ignition.I had the generator rebuilt and the 
shop said the voltage regulator checked ok. I cannot get the amp meter to 
register a charge in either the H or L position on the switch. When you turn 
on the lights it shows a discharge. The voltage at the battery terminals 
shows 6.3-6.4 volts. The old delco remy switch is not available. I ordered a 
new switch, but it works the lights only.All the wiring has been replaced 
and the connections checked and rechecked. Is there a way to check the 
generator output other than the amp meter? OR??????
  > Thanks
  > Ron Bledsoe
  > Lexington, OK
  > _______________________________________________
  > Farmall mailing list
  > http://www.antique-tractor.com/mailman/listinfo/farmall
  >


--------------------------------------------------------------------------------