[Farmall] F-20 Oil filter

[Guy Fay]

Karl, how far away were you from the fires?

-----Original Message-----
From: farmall-bounces at lists.antique-tractor.com
[mailto:farmall-bounces at lists.antique-tractor.com] On Behalf Of
olmstead at ridgenet.net
Sent: Monday, November 05, 2007 5:14 PM
To: Farmall/IHC mailing list
Subject: Re: [Farmall] F-20 Oil filter

Bob's list looks right.  The F-12 and F-14 filter mount is considerably
different.  The pot metal mount was a real weakness on the F-series
tractors.  I've never found one that wasn't deformed quite a bit from
overtightening, and they are frequently cracked.  If they aren't too badly
distorted, I have repaired them by filling the O-ring groove with JB Weld
and re-cutting the grove using a custom made tool on my milling machine. 
There's little hope of getting the gasket to seal when the outside lip of
the mount is bent downward 1/8"

It isn't unusual to look over three or four filter mounts (either F-20 or
F-12 style) to find one that is rebuildable.  It's worth picking them up
at swapmeets whenever you find one.  Incidentally, there are at least
three different styles of F-12 and F-14 filter mount.  Two different
gaskets to mate with engine block.

-Karl

-------------

> Andy, I'll go look for one in the parts stack when I have a chance today.
> It
> appears to be a 13602DB which is the same for the 10-20, Regular, F-20,
> and
> a bunch others. I'm guessing the 15-30, F-30, W-30, and most the unstyled
> McCormick Deerings. Does not appear in the book for the F-12/14 though.
>
> bobcurrie


_______________________________________________
Farmall mailing list
http://www.antique-tractor.com/mailman/listinfo/farmall