[Farmall] Splitdorf mag

[John Hall]

Nothing gummy , probably just worn like you said. I may change out the 
spring for a quick fix but most likely there is going to be some rebuilding 
involved. It has been developing this problem for quite some time. After 
getting a blister from cranking yesterday I've had enough--time to fix it.

John
----- Original Message ----- 
From: <Farmallgray at aol.com>
To: <farmall at lists.antique-tractor.com>
Sent: Sunday, March 11, 2007 3:44 PM
Subject: Re: [Farmall] Splitdorf mag


> John,
> I think they are the same (or very similar) coupling as used on the E4A. 
> The
> one used on the E4A was made by splitdorf. I had that problem
> on my Regular. The pawl and the notch it locks into were worn and the pawl
> wouldn't stay locked long enough. It doesn't need much spring pressure if 
> the
> notches are good and sharp.
> Make sure the 2 halves of the coupling move freely and aren't gummed up 
> also.
>
> Todd Markle
> <BR><BR><BR>**************************************<BR> AOL now offers free
> email to everyone.  Find out more about what's free from AOL at
> http://www.aol.com.
>
> _______________________________________________
> Farmall mailing list
> http://www.antique-tractor.com/mailman/listinfo/farmall