[AT] N.H. baler pick-pick up fingers

[RonMyers at wildblue.net]

I had to rebuild the entire pickup on my NH Hayliner 78 and i used a 3/8
air ratchet to remove the slats. you can get new pickup teeth at
Valu-Bilt.com

ron

> I've got a Super 66 New Holland baler that needs some of the pick up
> fingers
> replaced. I took a quick glance from underneath and I think you can pull
> off
> the cam roller and rotate the pipe they are mounted on and slide them out
> the side of the pickup. Probably have to unbolt them first. Am I right or
> will I have to be removing all the slats that go in between the fingers,
> the
> ones held in by 2 million flat head screws!
>
> John Hall
>
>
> _______________________________________________
> AT mailing list
> http://www.antique-tractor.com/mailman/listinfo/at
>