[AT] 461 Haybine

[Cecil Bearden]

Lew:
sounds like a common implement hub and probably has the 6 hole wheel.  
The hub is not a standard bolt pattern, but the spindle is.  if you go 
to a trailer supply they can probably get you a hub and wheel tat will 
fit and it will have a standard highway wheel on it.  An old pull type 
chisel or other pull ewquipment will probably have the same hub and 
wheel.  Schoup parts is one of the good suppliers.  Check on the wheel 
bolt pattern and get back to me and maybe I can find something here in 
the junk.  Without the tire it might not be so bad to ship.  Maybe we 
could go bus express with it.  Also need the distance from back to front 
of spindle to be sure.

Cecil in OKla



Lew Best wrote:
> Hi gang
>  
> I just got a New Holland 461 Haybine today that wanted to follow me
> home; need a left hub, wheel & tire to get it home though.  If the wheel
> is anything "remotely common" I can maybe find it locally?  Probably
> most expensive part to ship.  I didn't have anything more accurate than
> a tape measure to measure the spindle but it appears to be .75" outer;
> 1.25 inner measure on the spindle.  Can anyone verify this or better yet
> have a hub you'd sell?  Suggest a good source?
>  
> Thanks!
>  
> Lew Best near Waco, TX
>  
>  
>
> No virus found in this outgoing message.
> Checked by AVG Free Edition. 
> Version: 7.5.472 / Virus Database: 269.8.6/828 - Release Date: 6/1/2007
> 11:22 AM
>  
>
> _______________________________________________
> AT mailing list
> http://www.antique-tractor.com/mailman/listinfo/at
>
>