[AT] conventional or electronic ignition

[Cecil Bearden]

yep, sort of sooty black.  It is the center 2 plugs on a y69 Continental.... 
I don't think I can squeeze a HEI ignition in there as it is a clark 
Yardlift.  Pretty compact....  I may try to set the float level lower like 
Walt suggested...

Cecil
----- Original Message ----- 
From: <pga2 at hot1.net>
To: "Antique tractor email discussion group" <at at lists.antique-tractor.com>
Sent: Wednesday, June 14, 2006 5:51 AM
Subject: Re: [AT] conventional or electronic ignition


>
> Cecil,
> Either a GM HEI for a 4 cylinder or a Pertronix conversion kit should fix
> that fouling problem. I suspect that this is a gas engine and the mixture
> is too rich. The same thing will happen to my A-C RC especially if it
> idles a lot.
> Are the plugs that foul sooty black?
>
> Phil
>
>> One of my small forklifts needs spark plugs about every 30 days.  It
>> always
>> starts missing.  It is still a 6 volt system.  It starts great, but just
>> fouls plugs even though it does not burn oil...  Should I put in a 12 
>> volt
>> system with a 12v coil or is there another trick??
>>
>> Cecil in OKla
>
>
>
> _______________________________________________
> AT mailing list
> Remembering Our Friend Cecil Monson 11-4-2005
> http://www.antique-tractor.com/mailman/listinfo/at