[Farmall] Mott mower

Mike Sloane mikesloane at verizon.net
Thu Feb 16 15:58:28 PST 2006


Unlike Jim's rear mount Mott mower (actually called a "hammer knife") 
the center mount Mott can be run in reverse by turning over the belt, 
and the finish will be just like a putting green. I have the original 
manual for the 48" center mounted Mott Hammer Knife and can scan it in 
and send it as an Email attachment to anyone who is interested.

As someone mentioned, the bearings are the usual part that need 
replacement, and they are still available from Alamo dealers. But be 
prepared for sticker shock - you won't get much change back from a $100 
bill for just one bearing.

Mike

James Moran wrote:
> Ivan-
>   I can see how you might make that "saw tooth" allusion.  The  hammers are supposed to "overlap" sufficiently to minimize that  (humorous) effect.  You have an interesting sense of  humor...thanks for the smile.
>   My Mott (3-pt version) has a REALLY heavy roller.  If fact, the  damn thing entirely weighs in the neighborhood of an elephant.  It  is a fifties-vintage and made of STEEL (not just steel).  There is  a hernia in every removal and re-attach.
>   Thanks again for the grins.
>   Jim Moran
> 
> ivan <ivancou at alltel.net> wrote:  I know a guy who used one to mow his yard , the finnish looked  a lot like
> the teeth on a handsaw .
> ^-^-^-^-^-     Did wonders for his putting ,and the hook shot round the tree
> was awsome ; )
> Actually his was a 3 pt version mounted on a ford 800 that had a roller on
> the back ,it did a nice job of smoothing out the tire tracks . Ivan
> 
> 
> _______________________________________________
> Farmall mailing list
> http://www.antique-tractor.com/mailman/listinfo/farmall
> 
>
-- 


Mike Sloane
Allamuchy NJ
mikesloane at verizon.net
Website: <www.geocities.com/mikesloane>
Images: <www.fotki.com/mikesloane>




More information about the AT mailing list