[AT] 350 B engine swap problem

[pga2 at hot1.net]

Pull the starter first to be sure the pinion isn't jammed in the flywheel.

Phil

----- Original Message -----
>From    : Larry Sikes <larry at rockridgefarm.com>
Sent    : Sun, 16 Oct 2005 20:33:29 -0400
To      : Antique tractor email discussion group <at at lists.antique-
tractor.com>
Subject : [AT] 350 B engine swap problem

>I swapped an engine in my JD350B Crawler. The replacement ran when 
removed from the previous crawler.
As I was priming the fuel system (cranking) it suddenly
seized. Now the starter will not turn it over - I guess this
means I will need to pull the engine back out. Anyone
got any ideas short of pulling the engine?

Larry Sikes