[Steam-engine] Stainless vs. Sch 80

[Mike Longmead]

Andy
I work with stainless a lot, first it is very expensive compared to black 
iron. Stainless is difficult to work with, pipe threading requires good dies 
to produce acceptable threads. If the threads are not perfect the joints can 
weld when you tighten them. Once welded the joints must be cut apart.
Mike longmrad
----- Original Message ----- 
From: "Andy glines" <pioneersop96 at yahoo.com>
To: "Steam" <steam-engine at lists.stationary-engine.com>
Sent: Thursday, October 06, 2005 8:42 AM
Subject: [Steam-engine] Stainless vs. Sch 80


> Now I'm going to start a debate.  Hopefully (fingers
> crossed) it won't be long before I need to start
> installing new plumbing on the Huber.  As per
> suggestions here and at Steam School I am planning to
> use Sch. 80 steel pipe.  I have had two people
> recommend stainless steel to me this summer.  Has
> anyone gone with stainless?  Which grade of stainless
> should I use?  How much more $$$ for stainless?  Give
> me your opinions.
>
> Andy Glines
> Evansville, IN
>
>
>
> __________________________________
> Yahoo! Mail - PC Magazine Editors' Choice 2005
> http://mail.yahoo.com
> _______________________________________________
> Steam-engine mailing list
> http://www.stationary-engine.com/mailman/listinfo/steam-engine
>