[AJD] Identifing a styled A hood.

[Chris C]

I would appreciate that Greg,  but let me look it over
again first.  I just seem too weird with only one gas
A styled hood shown that I would have two different
hoods..  I must be missing something obvious...  

        Chris

--- greg at theoldtractorcompany.com wrote:

> Chris
> let me know if you need me to measure hoods too,
> have a lot of A's around here
> Greg
> 
> 
> 
> Greg Stephen
> The Old Tractor Company
> Stephen Equipment Company
> PO Box 709
> Franktown, CO 80116
> 303-663-5246
> 303-468-0377 FAX<<--GREAT WAY TO REACH ME!
> 
> On Sun Nov 27 18:32 , Chris C <jdnutinwa at yahoo.com>
> sent:
> 
> >
> >Dean,
> >
> >      I am using PC-675 (3-60) the printed version.
>  I
> >did not list the part numbers for hoods after
> 584,000
> >as I know it is not one of those.  
> >
> >      I need to know if the earlier hood,  AA1781R
> >(477000-487999)
> >and AA2257R (488000-583999) were all fuel or gas
> were
> >there only All fuel A's prior to 584000.  What I
> have
> >does not fit the bill of the two late A hoods,  and
> >with no description of the early two numbers it is
> >hard to figure out exactly what I have here.
> >
> >                  Chris
> >
> >     
> >--- Dean VP deanvp at att.net> wrote:
> >
> >> Chris:
> >> 
> >> I don't know what parts catalog you are referring
> to
> >> but my Parts Catalog
> >> for the Styled A's shows 4 different hoods:
> >> 
> >> AA1781R (477000-487999)
> >> AA2257R (488000-583999)
> >> AA3945R* (584000-      ) Hood (All Fuel only)
> >> AA3946R (584000-655571) Hood (Gasoline only)
> >> 
> >> * Also used on gasoline burning tractors
> >> 655572-662728 equipped with
> >> Auxiliary gasoline tank.
> >> 
> >> Data from PC-675-(3-60) on an original JD CDRom
> >> DB1293
> >> 
> >> 
> >> Dean A. Van Peursem
> >> Snohomish, WA 98290
> >> 
> >> Forbidden fruits create many jams!
> >> 
> >> www.deerelegacy.com
> >> 
> >> http://members.cox.net/classicweb/email.htm
> >> 
> >> 
> >> 
> >> -----Original Message-----
> >> From:
> >>
> antique-johndeere-bounces at lists.antique-tractor.com
> >>
>
>[antique-johndeere-bounces at lists.antique-tractor.com','','','')">antique-johndeere-
> bounces at lists.antique-tractor.com]
> >> On Behalf Of
> >> Chris C
> >> Sent: Sunday, November 27, 2005 9:18 AM
> >> To: Antique John Deere mailing list
> >> Subject: RE: [AJD] Identifing a styled A hood.
> >> 
> >> 
> >>    Dean,
> >> 
> >>       I am measuring the hood on the pulley side,
> 
> >> with the intrument panel and grills off end of
> metal
> >> to end of metal.  
> >> 
> >>       I was reading in my Model A book last night
> >> and
> >> it mentions a lengthening of the wheel base in
> the
> >> early styled A,  but has no mentions of a change
> in
> >> the hood.  I was also hoping to see an example of
> a
> >> gas only A from that era but they only had al
> fuel's
> >> pictured.  
> >> 
> >>        I would imagine that this hood is from an
> >> early
> >> styled gas only A,  but my parts book fails to
> >> indentify that there was an all fuel hood and a
> gas
> >> only hood.
> >> 
> >>                             Chris
> >> 
> >> --- Dean VP deanvp at att.net> wrote:
> >> 
> >> > Chris:
> >> > 
> >> > How are you measuring the hoods. End of metal
> to
> >> end
> >> > of metal or the length
> >> > of the hood that would show if the rear end
> >> > (instrument) cap and grills were
> >> > installed? 
> >> > 
> >> > Dean A. Van Peursem
> >> > Snohomish, WA 98290
> >> > 
> >> > Forbidden fruits create many jams!
> >> > 
> >> > www.deerelegacy.com
> >> > 
> >> > http://members.cox.net/classicweb/email.htm
> >> > 
> >> > 
> >> > 
> >> > -----Original Message-----
> >> > From:
> >> >
> >>
> antique-johndeere-bounces at lists.antique-tractor.com
> >> >
> >>
>
>[antique-johndeere-bounces at lists.antique-tractor.com','','','')">antique-johndeere-
> bounces at lists.antique-tractor.com]
> >> > On Behalf Of
> >> > Chris C
> >> > Sent: Saturday, November 26, 2005 4:38 PM
> >> > To: ATIS LIST
> >> > Subject: [AJD] Identifing a styled A hood.
> >> > 
> >> > 
> >> > 
> >> >     Quite some time ago,  I bought a styled A
> hood
> >> > off
> >> > of Ebay.  It sat in storage for several months,
> 
> >> > then
> >> > I got around to trying to mount it on the
> tractor
> >> I
> >> > intended it to go on.  A late styled A,  over
> >> serial
> >> > number 584,000.  To my dismay,  it did not fit,
> 
> >> and
> >> > my presumption that all styled gas only A hoods
> >> are
> >> > the same (except those with the battery in the
> >> hood)
> >> > was blown.
> >> > 
> >> >     So,  I am studying my parts book,  and
> >> measuring
> >> > hoods..  All the late Styled A's that I have
> are
> >> 49
> >> > 7/8 inches long on the side.  This paticular
> hood
> >> is
> >> > 48" long.  So I am guessing that if there is
> such
> >> a
> >> > think as a 'short framed A'  that this is the
> one.
> >> 
> >> > My
> >> > parts book identifies two hood parts numbers
> that
> >> it
> >> > could be,  AA1781R for serial numbers
> >> 477000-487999
> >> > or
> >> > AA2257R for 488000-583999.  However,  my parts
> >> book
> >> > does not specify All fuel of gas for either of
> >> those
> 
=== message truncated ===



		
__________________________________ 
Yahoo! Music Unlimited 
Access over 1 million songs. Try it free. 
http://music.yahoo.com/unlimited/