[Steam-engine] Hard water & soft plug

[Richard Strobel]

Small world Corky..I just talked to you the other day about hand hole 
gaskets :-))  Will place an order after we get it U.T.'d.

RickinHelena






----- Original Message ----- 
From: <Used2BeDa at aol.com>
To: <steam-engine at lists.stationary-engine.com>
Sent: Monday, October 31, 2005 9:22 PM
Subject: Re: [Steam-engine] Hard water & soft plug


> If you need ASME std plugs .I have some also. 3/8 waterside and fireside,
> 1/2,3/4,1" ASME std. and they have to be stamped to be acceptable.
>
>
>
>
> Corky Staudinger
> D&H Spring, Machine and Welding
> See Us at: www.dandhspring.com
> _______________________________________________
> Steam-engine mailing list
> http://www.stationary-engine.com/mailman/listinfo/steam-engine
>