[Farmall] lets talk Farmalls

[Jim Becker]

The 240 was available with either  2 1/2 or 3 1/2 inch cylinder on the 
Fast-Hitch.  Don't know which cylinders were used on the 340.  That inch 
makes a big difference on the lifting power.

Jim Becker        jim.becker at verizon.net

----- Original Message ----- 
From: "Greg Hass" <gkhass at avci.net>
To: "Farmall/IHC mailing list" <farmall at lists.antique-tractor.com>
Sent: Wednesday, March 30, 2005 10:12 PM
Subject: Re: [Farmall] lets talk Farmalls


> Just a little follow-up to Larry Hardesty's letter...
>
> Although we found the hydraulics on both to be of adequate speed, they did 
> have less pressure because a couple of implements we tried to move with 
> them would not lift with the 240 and we were forced to put a newer tractor 
> with higher pressure hydraulics on in order to lift those implements.