[AT] Question

[Richard Fink Sr]

Thanks Dan Brad i guess it is back to the drawing board. I will have about 
100 to put in. Will look for a rental hammer to hang on the backhoe.
R Fink
PA



At 06:36 AM 3/28/2005, you wrote:
>On 27 Mar 2005 at 11:46, Richard Fink Sr wrote:
>
> > Hi every one i have a need in the near future for a post hole drill. Can
> > any one tell me if one can be mounted on a Case SC. It has some sort on
> > hitch on it but not like the 3 point i have seen on other tractors. Can
> > this be made to work???????
> > R Fink
>Most of the early power post hole diggers in this area had frames which
>mounted to a solid drawbar and the gear box and auger slid up and
>down in the frame. They were actually better than the three point units
>for digging because they moved in a true vertical path rather than an
>arc. Some had down pressure some didn't.
>
>The problem with them was the length of time it took to mount them vs a
>3 pt unit.
>
>I now use a hydraulicly driven auger which hangs from a pipe that can
>slide over one of the bale spears on my loader and fastens with a single
>bolt. Very quick to install, down pressure and with a 3 foot extension on
>it I can dig deeper than a 3 pt unit.
>
>_______________________________________________
>AT mailing list
>http://www.antique-tractor.com/mailman/listinfo/at