[AT] cub / prime oil pump
charlie hill
chill8 at cox.net
Fri Jun 10 14:25:35 PDT 2005
Yep that's the type I was talking about.
Charlie
----- Original Message -----
From: <HaliganBar at aol.com>
To: <at at lists.antique-tractor.com>
Sent: Friday, June 10, 2005 2:36 PM
Subject: Re: [AT] cub / prime oil pump
> Charlie,
>
> They were still around as of the early 90's. We had looked into installing
> one on a new fire truck we were ordering. Thought it might help with
> start-ups
> since we rarely have time to let the truck warm-up properly. If I remember
> correctly it was just an accumulator that stored oil under pressure when
> the
> engine was running. The stored pressure was released when you pushed the
> starter
> button.
>
> Karl
>
> In a message dated 6/10/05 1:42:26 PM Eastern Daylight Time,
> chill8 at cox.net
> writes:
>
>> There used to be a device on the market that pre-lubed your engine.
>> It stored engine oil under presure while the engine was running and a
>> check
>> valve kept it under presure after shut off. Then on re-start a solidoid
>> released the check valve and the oil was forced to the bearings through
>> one
>> of the oil tap passages in the block.
>>
>> I never tried one but always wanted to. Don't know if they are still
>> around
>>
>> or not.
>>
>> Charlie
>
> _______________________________________________
> AT mailing list
> http://www.antique-tractor.com/mailman/listinfo/at
>
>
> --
> No virus found in this incoming message.
> Checked by AVG Anti-Virus.
> Version: 7.0.323 / Virus Database: 267.6.6 - Release Date: 6/8/2005
>
>
More information about the AT
mailing list