[Ford-ferguson] Vol 13, FergusonTO-20 bush
Buckies at aol.com
Buckies at aol.com
Tue Jun 14 13:32:37 PDT 2005
to 20, 30 and 9n hydraulics were never intended to hold in any position. By
precisely holding the lever in one spot you may, or may not, get a position
to hold. Any movement of the top link will erase this option.
Try to connect the top link to something else. On a bush hog you really
don't need a top link The ferg/ford top was never made to accept this abuse.
It was designed only for tillage.
That said, you may control the height with the control lever, if you are
lucky.
Pressure loss in operation is usually the relief valve or the cyl piston
rings. or the piston cyl gasket.,,, or a bad exhaust valve in the pump. or maybe
the long standpipe. Or maybe your mother in law.
Hyd overhaul in N means checking and doing "everything" all at once
ron
More information about the AT
mailing list