[AJD] Final Drive Drain Plug

[Robert M. Massengale]

Frank -

It just happens there is a pawn shop on my route to the NAPA store so I'll stop there 
first.  Good suggestion, thanks!

Mike
Robert M. Massengale
Fredericksburg, Texas 78624

> Mike
> it is in fact 3/4 inch
> a 3/4 inch drive ratchet will do wonders.....
> you can borrow or pick up cheap one at pawn shop
> 
> Frank
> gremaux at tein.net
> Central Montana
> http://www.angelfire.com/mt/deeregp/index.html
> ----- Original Message ----- 
> From: "Robert M. Massengale" <ltcmikem at ktc.com>
> To: "Antique John Deere mailinglist" 
> <antique-johndeere at lists.antique-tractor.com>
> Sent: Monday, January 17, 2005 12:58 PM
> Subject: [AJD] Final Drive Drain Plug
> 
> 
> > Almost embarrassing to ask...  I though I had the transmission &
> > final drive in my '41 B drained, but just discovered the large drain
> > plug for the final drive under the drawbar support.  Unlike the
> > transmission pipe drain plug, the final drive drain plug has a
> > recessed square slot.  I don't have any tools around the shop that
> > fit the drain plug hole. The square end on my 1/2 inch scoket
> > extension is too small.  It looks to be about a 3/4 square recessed
> > hole in the drain plug.  Is there a common tool Im overlooking that
> > fits this hole or am I going to have to fire up the forge?
> >
> > Mike
> > Robert M. Massengale
> > Fredericksburg, Texas 78624
> > _______________________________________________
> > Antique-johndeere mailing list
> > http://www.antique-tractor.com/mailman/listinfo/antique-johndeere
> >
> > 
> 
> 
> _______________________________________________
> Antique-johndeere mailing list
> http://www.antique-tractor.com/mailman/listinfo/antique-johndeere
> 
>