[AJD] Final Drive Drain Plug

[Frank]

Mike
it is in fact 3/4 inch
a 3/4 inch drive ratchet will do wonders.....
you can borrow or pick up cheap one at pawn shop

Frank
gremaux at tein.net
Central Montana
http://www.angelfire.com/mt/deeregp/index.html
----- Original Message ----- 
From: "Robert M. Massengale" <ltcmikem at ktc.com>
To: "Antique John Deere mailinglist" 
<antique-johndeere at lists.antique-tractor.com>
Sent: Monday, January 17, 2005 12:58 PM
Subject: [AJD] Final Drive Drain Plug


> Almost embarrassing to ask...  I though I had the transmission &
> final drive in my '41 B drained, but just discovered the large drain
> plug for the final drive under the drawbar support.  Unlike the
> transmission pipe drain plug, the final drive drain plug has a
> recessed square slot.  I don't have any tools around the shop that fit
> the drain plug hole. The square end on my 1/2 inch scoket
> extension is too small.  It looks to be about a 3/4 square recessed
> hole in the drain plug.  Is there a common tool Im overlooking that
> fits this hole or am I going to have to fire up the forge?
>
> Mike
> Robert M. Massengale
> Fredericksburg, Texas 78624
> _______________________________________________
> Antique-johndeere mailing list
> http://www.antique-tractor.com/mailman/listinfo/antique-johndeere
>
>