[Farmall] F 12 Price

[John Paur]

No, cutoffs is when the steel wheel spokes are cut and rubber tire rims are
welded on.  Rubber tires are then mounted and the tractor is converted from
steel wheels  rubber tires.  John

----- Original Message -----
From: "Johnny and Bobbie Walton" <waltonb2 at cableone.net>
To: "Farmall/IHC mailing list" <farmall at lists.antique-tractor.com>
Sent: Saturday, January 15, 2005 11:46 AM
Subject: Re: [Farmall] F 12 Price


> John,
> I'm trying to restore a F-12 that is on steel wheels.  I have seen
pictures
> of some without the lugs.  Is that what you mean by cutoffs?  I would like
> to do something like that so I could drive it on the road if I ever get it
> running.  Johnny
> ----- Original Message -----
> From: "John Paur" <johnjanpaur at directcon.net>
> To: "Farmall/IHC mailing list" <farmall at lists.antique-tractor.com>
> Sent: Saturday, January 15, 2005 12:49 PM
> Subject: Re: [Farmall] F 12 Price
>
>
> > Kevin,  When you say it's on rubber with flat spokes I THINK that means
> > it's
> > on cutoffs.  I don't think that IH put out a flat spoke rear wheel for
> > rubber.  I believe they were either round spoke or cast wheels.  The
steel
> > wheels were flat spoke.  John
> >
> > ----- Original Message -----
> > From: "kevin hood" <hoodkevin at hotmail.com>
> > To: <farmall at lists.antique-tractor.com>
> > Sent: Saturday, January 15, 2005 9:33 AM
> > Subject: Re: [Farmall] F 12 Price
> >
> >
> >> No, It's on rubber w/flat spokes & narrow front end. They are so rare
in
> > our
> >> area is why I would consider that price. I would be willing to travel a
> >> little ways if I could save a $1,000.
> >>
> >> >From: "John Paur" <johnjanpaur at directcon.net>
> >> >Reply-To: Farmall/IHC mailing list <farmall at lists.antique-tractor.com>
> >> >To: "Farmall/IHC mailing list" <farmall at lists.antique-tractor.com>
> >> >Subject: Re: [Farmall] F 12 Price
> >> >Date: Sat, 15 Jan 2005 08:53:31 -0800
> >> >
> >> >I don't know what they might go for in SC but in my opinion that would
> >> >be
> >> >very high for California.  Is it on steel?   John
> >> >
> >> >----- Original Message -----
> >> >From: "kevin hood" <hoodkevin at hotmail.com>
> >> >To: <farmall at lists.antique-tractor.com>
> >> >Sent: Saturday, January 15, 2005 8:25 AM
> >> >Subject: [Farmall] F 12 Price
> >> >
> >> >
> >> > > Is $2,500 to much for a F 12? It is an old restoration. It's very
> >> >straight
> >> >&
> >> > > really only needs cleaning up.
> >> > >
> >> > > Thanks,
> >> > >    Kevin Hood (SC)
> >> > >
> >> > >
> >> > > _______________________________________________
> >> > > Farmall mailing list
> >> > > http://www.antique-tractor.com/mailman/listinfo/farmall
> >> > >
> >> >
> >> >
> >> >_______________________________________________
> >> >Farmall mailing list
> >> >http://www.antique-tractor.com/mailman/listinfo/farmall
> >>
> >>
> >> _______________________________________________
> >> Farmall mailing list
> >> http://www.antique-tractor.com/mailman/listinfo/farmall
> >>
> >
> >
> > _______________________________________________
> > Farmall mailing list
> > http://www.antique-tractor.com/mailman/listinfo/farmall
>
> _______________________________________________
> Farmall mailing list
> http://www.antique-tractor.com/mailman/listinfo/farmall
>