[AT] Pulling a sheepsfoot with a Ford 8n

[R Mull]

I don't think you do, but you could try it by plowing up a spot of ground 
and hook the tractor to the sheep's foot and see if you can pull it through 
the plowed ground . Better to try it on level ground and see what happens 
than getting it down in a hole first.

Thanks,
Robert Mull
Woodstock, Georgia
----- Original Message ----- 
From: "Chuck Saunders" <csaunders at bluevalleyk12.org>
To: "Antique tractor email discussion group" <at at lists.antique-tractor.com>
Sent: Thursday, February 10, 2005 8:48 AM
Subject: [AT] Pulling a sheepsfoot with a Ford 8n


> Hi Guys,
> I  am getting ready to build a dam and doing it cheap. I want to use my 8n 
> to pull a small sheepsfoot roller. the roller has pads not spikes, is 5 
> feet wide and 3 feet in diameter.  Unit weighs in at 4000 lbs. working in 
> 6 inch lifts, do I have enough  tractor to pull this?
> Thanks
> Chuck Saunders
> Kansas City, MO
> _______________________________________________
> AT mailing list
> http://www.antique-tractor.com/mailman/listinfo/at
>