[AT] F-600 King Bolts

[deanvp at att.net]

Cecil:

I really don't know but I suspect quite a bit since the F600 is the long hood version and the N600 is the in-between version as opposed to the Cab-Over version. I haven't been able to find another N600 anywhere arounbd here for parts including searching in several salvage yards.  Must not have been many N's made or they have all gone to melt down heaven. 

-------------- Original message from "Cecil Bearden" <crbearden at copper.net>: -------------- 


> Dean 
> What is the difference in a N-600 and an F-600 as far as body parts.. 
> 
> Cecil in Okla 
> 
> 
> ----- Original Message ----- 
> From: "Dean VP" 
> To: "'Antique tractor email discussion group'" 
> 
> Sent: Tuesday, December 27, 2005 10:42 PM 
> Subject: RE: [AT] F-600 King Bolts 
> 
> 
> > 
> > Cecil: 
> > 
> > I own a 68 Ford N600 with a really long roll back bed on it with hydraulic 
> > winch. Know as "Rollie". If you find any good sources for parts for this 
> > era of truck I sure would appreciate you passing the names along. If I 
> > could 
> > find a replacement set of good fenders at a reasonable price I would be 
> > interested too. 
> > 
> > I have a complete set of original FORD maintenance books on this truck so 
> > if 
> > there is anything in there you need, don't hesitate to holler. 
> > 
> > 
> > Dean A. Van Peursem 
> > Snohomish, WA 98290 
> > 
> > Forbidden fruits create many jams! 
> > 
> > www.deerelegacy.com 
> > 
> > http://members.cox.net/classicweb/email.htm 
> > 
> > 
> > 
> > -----Original Message----- 
> > From: at-bounces at lists.antique-tractor.com 
> > [mailto:at-bounces at lists.antique-tractor.com] On Behalf Of Cecil Bearden 
> > Sent: Tuesday, December 27, 2005 7:36 PM 
> > To: Antique tractor email discussion group 
> > Subject: Re: [AT] F-600 King Bolts 
> > 
> > I am rebuilding a 71 or 72 F600. This is going to be my hauling truck, I 
> > installed a 22 ft Schwartz tilt bed on it, but the truck was sorta damaged 
> > in a collision with the top of a 500 BBl oil tank during a small tornado.. 
> > I found another truck to get fenders and hood off of, but I need to 
> > rebuild 
> > the front axle. Anyone have an old catalog of front axle parts?? Or have 
> > a 
> > 
> > Ford part number... 
> > Right now the front fenders are off so that I can switch the power 
> > steering 
> > from the donor truck. Have to move the engine over about 2 inches to get 
> > the power steering box to go in. This would be a great time to install 
> > the 
> > king bolts and bushings. I have spent about 5 hours on the internet and 
> > found nothing.... Had to stay inside due to the flu anyhow, but I would 
> > rather be working on the truck.... 
> > 
> > Cecil in OKla 
> > 
> > _______________________________________________ 
> > AT mailing list 
> > Remembering Our Friend Cecil Monson 11-4-2005 
> > http://www.antique-tractor.com/mailman/listinfo/at 
> > 
> > 
> > 
> > _______________________________________________ 
> > AT mailing list 
> > Remembering Our Friend Cecil Monson 11-4-2005 
> > http://www.antique-tractor.com/mailman/listinfo/at 
> 
> _______________________________________________ 
> AT mailing list 
> Remembering Our Friend Cecil Monson 11-4-2005 
> http://www.antique-tractor.com/mailman/listinfo/at