[AT] F-600 King Bolts

[Cecil Bearden]

Dean
What is the difference in a N-600 and an F-600 as far as body parts..

Cecil in Okla


----- Original Message ----- 
From: "Dean VP" <deanvp at att.net>
To: "'Antique tractor email discussion group'" 
<at at lists.antique-tractor.com>
Sent: Tuesday, December 27, 2005 10:42 PM
Subject: RE: [AT] F-600 King Bolts


>
> Cecil:
>
> I own a 68 Ford N600 with a really long roll back bed on it with hydraulic
> winch. Know as "Rollie". If you find any  good sources for parts for this
> era of truck I sure would appreciate you passing the names along. If I 
> could
> find a replacement set of good fenders at a reasonable price I would be
> interested too.
>
> I have a complete set of original FORD maintenance books on this truck so 
> if
> there is anything in there you need, don't hesitate to holler.
>
>
> Dean A. Van Peursem
> Snohomish, WA 98290
>
> Forbidden fruits create many jams!
>
> www.deerelegacy.com
>
> http://members.cox.net/classicweb/email.htm
>
>
>
> -----Original Message-----
> From: at-bounces at lists.antique-tractor.com
> [mailto:at-bounces at lists.antique-tractor.com] On Behalf Of Cecil Bearden
> Sent: Tuesday, December 27, 2005 7:36 PM
> To: Antique tractor email discussion group
> Subject: Re: [AT] F-600 King Bolts
>
> I am rebuilding a 71 or 72 F600.  This is going to be my hauling truck, I
> installed a 22 ft Schwartz tilt bed on it, but the truck was sorta damaged
> in a collision with the top of a 500 BBl oil tank during a small tornado..
> I found another truck to get fenders and hood off of, but I need to 
> rebuild
> the front axle.  Anyone have an old catalog of front axle parts??  Or have 
> a
>
> Ford part number...
> Right now the front fenders are off so that I can switch the power 
> steering
> from the donor truck.  Have to move the engine over about 2 inches to get
> the power steering box to go in.  This would be a great time to install 
> the
> king bolts and bushings.  I have spent about 5 hours on the internet and
> found nothing....  Had to stay inside due to the flu anyhow, but I would
> rather be working on the truck....
>
> Cecil in OKla
>
> _______________________________________________
> AT mailing list
> Remembering Our Friend Cecil Monson 11-4-2005
> http://www.antique-tractor.com/mailman/listinfo/at
>
>
>
> _______________________________________________
> AT mailing list
> Remembering Our Friend Cecil Monson 11-4-2005
> http://www.antique-tractor.com/mailman/listinfo/at