[AT] Shop thoughts (was)Air Lines

[Ralph Goff]

Surprisingly to some , even dry old Sask. has moisture /condensation 
problems . I've had problems sandblasting even on small jobs. Paint spraying 
too although I have not done much of that yet. But I"m seeing the need for a 
good water separation system already. So far my system is just rubber hose 
from the compressor although I have plans of putting in a pipeline one of 
these days.  Its also pretty annoying trying to blow the dust off a combine 
in the fall and the air nozzle freezes up with condensation.
Fairly humid here today too although the strong NW wind makes it livable at 
80 some degrees. I'm on an easy job today disking summerfallow in the air 
conditioned tractor cab so better get back to it.

Ralph in Sask.
http://lgoff.sasktelwebsite.net/
----- Original Message ----- 
From: "charlie hill" <chill8 at cox.net>
To: "Antique tractor email discussion group" <at at lists.antique-tractor.com>
Sent: Tuesday, August 02, 2005 7:12 AM
Subject: Re: [AT] Shop thoughts (was)Air Lines


> Same here Lou.  I wasn't trying to put down anyone's system.  Heck my 
> personal system consists of a portable compressor (like frame carpenters 
> use) and some 3/8 air line.  I was just trying to show appreciation for a 
> first class system.  The message that started this thread ruled out steel 
> pipe in it's opening line but no reason was stated for excluding it.   If 
> I ever build an air system like I want it will be very similar to the one 
> shown on the TP site.  Not because it is flashy or showy but because that 
> is what does the best job of keeping air dry.   Believe me, in coastal NC 
> like in FL that is a BIG issue.
>
> Charlie
> ----- Original Message ----- 
> From: "Louis" <louis at kellnet.com>
> To: "'Antique tractor email discussion group'" 
> <at at lists.antique-tractor.com>
> Sent: Tuesday, August 02, 2005 8:18 AM
> Subject: RE: [AT] Shop thoughts (was)Air Lines
>
>
>> Farmer,
>>
>> I wasn't intending to ruffle any feathers.  I used a rubber hose on the
>> floor for years.  I got real tired of unplugging my sandblaster and 
>> having a
>> paint job ruined because of water.
>>
>> My wife's grandfather on his own went to the hardware store, and got a 
>> bunch
>> of pipe that was left over after the store had cut other pipe to custom
>> length.  He put it all up for me, that included threading the pipe.  He 
>> was
>> happy to have something to do.
>>
>> As far as my big compressor having an automatic drain, it came with the
>> compressor.  Originally I was looking at a compressor at TSC. I went over 
>> to
>> a locally owned tool store, to compare compressors.  They sold me the 
>> unit
>> that I have for $100 over what the compressor would have cost from TSC. 
>> It
>> is larger and has the drain and automatic low oil shut down on it.
>>
>> I don't buy things just to have them, I buy what is needed in my line of
>> work.  Yes, I originally started restoring tractors as a hobby, but it 
>> has
>> grown into a business.
>>
>> I think what I was trying to say originally is that pipe helps 
>> tremendously
>> in getting water out of the air system.
>>
>> Lou
>>
>> -----Original Message-----
>> From: at-bounces at lists.antique-tractor.com
>> [mailto:at-bounces at lists.antique-tractor.com] On Behalf Of Indiana 
>> Robinson
>> Sent: Monday, August 01, 2005 8:00 PM
>> To: Antique tractor email discussion group
>> Subject: RE: [AT] Shop thoughts (was)Air Lines
>>
>>
>> On 1 Aug 2005 at 13:17, Dean VP wrote:
>>
>>> Farmer:
>>>
>>> I am a bit concerned that you are over reacting here a bit. I don't
>>> want to try to characterize any list members shop as I haven't seen
>>> very many. What works for them is fine with me. But I think a wrong
>>> impression can be gained by the characterization that those of us who
>>> use more than rubber hose in our air lines have extravagant shops and
>>> have thrown money foolishly into our shops is a bit off the edge,
>>> IMHO.
>>>
>>> I've seen a very good operating air compressor system made from a
>>> portable compressor, a coil of copper tubing and one water filter.
>>> That didn't cost very much and was a bit cumbersome. But it worked
>>> quite well.
>>>
>>
>>
>>
>> Hi Dean:
>>
>> Actually I was not really responding to your post, I know you to be
>> generally frugal
>> from years of reading your stuff.   :-)   I certainly have nothing 
>> against
>> iron pipe
>> except it takes more "sweating" in general than copper (pun intended). I
>> guess I have
>> been on this list long enough to be dangerous...   :-)   I have seen the
>> same pattern
>> here so often that I can feel it coming like a cold fog on a dark night.
>> First a few guys
>> start discussing what works and what can be better. Next someone 
>> invariably
>> starts
>> talking about "industrial standards" then several guys kick into full Tim
>> Taylor mode and
>> someone starts saying that even iron pipe is no good and only gold plated
>> stainless steel
>> will work because a piece of iron pipe exploded in 1903 and killed a cat 
>> in
>> Alabama and
>> besides that is what they use in the nuclear plant that they work in...
>> ;-)    Maybe
>> this time I swung the bat before the pitcher actually let go of the ball.
>> But I know it
>> is coming... It always does... I can feel that cold damp fog...   ;-) Tim
>> Taylor lives.
>>
>>
>>
>> -- 
>> "farmer", Esquire
>> At Hewick Midwest
>>      Wealth beyond belief, just no money...
>>
>> Paternal Robinson's here by way of Norway (Clan Gunn), Scottish 
>> Highlands,
>> Cleasby Yorkshire England, Virginia, Kentucky then Indiana. In America 
>> 100
>> years
>> before the revolution.
>>
>>
>> Francis Robinson
>> Central Indiana USA
>> robinson at svs.net
>>
>> _______________________________________________
>> AT mailing list http://www.antique-tractor.com/mailman/listinfo/at
>>
>>
>> _______________________________________________
>> AT mailing list
>> http://www.antique-tractor.com/mailman/listinfo/at
>>
>
> _______________________________________________
> AT mailing list
> http://www.antique-tractor.com/mailman/listinfo/at
>
>
> -- 
> No virus found in this incoming message.
> Checked by AVG Anti-Virus.
> Version: 7.0.338 / Virus Database: 267.9.7/60 - Release Date: 7/28/2005
>
>